Upgrading my LED ceiling light

A rectangular ceiling light fixture with dimensions labeled as 100 cm long, 26 cm wide, and 8 cm high.

After two years in operation, the LED current source in my LED ceiling light caused some problems. The LEDs connected to this current source were flickering. So I had to take everything apart, to substitute the defect current source. I also upgraded the numbers of LEDs. 12 white 3W LEDs were already installed, I added 3 white 10W LEDs (Bridgelux ES Array). They have been kindly provided by Farnell.com.

Overview Bridgelux LEDs: https://web.archive.org/web/20260125063429/https://de.farnell.com/bridgelux/ Datasheet Bridgelux ES Array LEDs: https://web.archive.org/web/20260311082722/https://www.farnell.com//datasheets/516715.pdf Link to product page: https://web.archive.org/web/20260125063429/https://de.farnell.com/bridgelux/bxra-w0402-00000/array-warm-weiss-400lm/dp/1787314

Four small LED modules with blue and red wires connected on a white surface.

I also used new current sources from Mean Well - MW LPC-35-700. Rated current: 700mA, DC voltage range 9 ~ 48V. Link for more information: http://www.meanwelldirect.co.uk/public/ranges/pdfs/r1203/r1203_3.pdf

Electronic sensors and colorful wires attached to a dark, metallic rectangular surface with visible screws.

Altogether there are 15 LEDs with a total power of 66W installed in this lamp - shinging so bright to turn the night into day around my PC desk.

A long, rectangular pendant light fixture hangs from the ceiling above a desk area.