UP! Plus: thermal shots

After the thermal shots of the Raspberry Pi I also made some therma images of my UP! Plus 3D printer.

pre-heating

Pre-heating is important to minimize wrapping. After 10min of pre-heating the heat-bed has a temperature of 55°C. ![UP! Plus pre-heating](/assets/2013/02/ccd_UP_plus_heatbed.jpg)![UP! Plus pre-heating](/assets/2013/02/IR_UP_plus_heatbed.jpg)

print

During printing the ABS has a temperature of 63°C and the heat bed has 86.6°C. ![UP! Plus print](/assets/2013/02/ccd_UP_plus_print.jpg)![UP! Plus print](/assets/2013/02/IR_UP_plus_print.jpg)

extruder head

The extruder head temperature is 207.3°C while printing. ![UP! Plus extruder head](/assets/2013/02/ccd_UP_plus_extruder.jpg)![UP! Plus extruder head](/assets/2013/02/IR_UP_plus_extruder.jpg)

February 23, 2013
allgemeines basteln technik 3d printer thermal images thermal shots up plus